CMS - CM10 - Concept Model Domiciles Development - Ship Name & Score Accumulator

Domiciles Gameshow Concept Bid Miniature Set Model

Ship Name & Score Accumulator




CAD Component Design Phase

Horrendous Ship Name Text Applying


The ship name was intended to be as offensive as possible and totally typical with the attitude of far right, racist nationalists always saying migrants should go back where they came from and referring to human beings as Johnny foreigner. To fit the seventies vibe the lettering would be glittery, fat round with light bulbs. The gameshow was called 'Get out of Here' so it was worked around that


As mentioned this is most certainly not the way I think, taking the script to the max makes it all the more satisfying when the host gets what’s coming to her and a taste of here own as its her who is dragged off screaming.



  • SS Get Out of Here
  • SS FO
  • SS Go Back
  • SS Get Lost
  • SS Removals
  • SS Foreigner Fly Away


Till came up with:


SS FO Johnny Foreigner


Echoling the mentality of small minded little englander racists tend to say.


The ship text was easy by comparison. to the stage lettering.


By luck I could some stick text labels that fitted the gameshow just right both size and style.


Fat and Chunky, glittery and sequenced to simulate fairground light bulbs, these were just cut out and stuck on.


Score Accumulators Door Fairground Lightbulb Arrays


I chose to do the score systems as Fill up accumulators for several reasons:


  • There was a set goal the contestants were aiming for, out just who scores the most as getting to 100 lean getting residence and passport. Thus, could show that as a prize.
  • A fill up accumulator is very low tech like 70s game shows were.
  • It could look like a leak from the boat and have dirty water flowing in.
  • It would be clear as to what the target was.
  • Thos would also be easy for us to make as no mechanics needed and could be made from mostly MDF but with a sealed area.
  • These I decided to build in a laminated manner with white card or plastic at the back, the scale and name photo print out then the laser printed frame on top.
  • This was also far easier for to build scaled down.
  • Thes clearly had to be laser cut for the frames and had printouts gued behind using the superdream font





Share by: